Subject: Teflon encapsulated silicone o-rings
From: Paul
Date: 11/7/2000, 8:47 AM


Paul, i finally got a chance to try the o-rings that you sent to me. the
outer water seal fits very ...

SNIP

......about 10% to 20% greater diameter for them to work.
Sounds like we need some size adjustments. I have some from that set I
sent
you so I will measure them and come up with new part numbers when you find
out what works and does not work. Ed Anderson is also experimenting with
these O-rings.

Paul Lamar


Ed Anderson wrote:

Paul,
    I received the dash 272 teflon coated "O" ring from McMasters.  Looks
just like the ones from Hayes, however, the one I order was about 1 1/2" too
large when placed in the inner "O" ring groove.  So clearly I messed up on
measuring.  But, I have not given up.  I have some Hayes "O" rings coming in
today, so I'll have a chance to more accurately measure the required size.
I'll do that and order another "O" ring from McMaster to check.  The ones
from McMaster will be less than half the price charged by Hayes, so well
worth experimenting to find the right dash number size.  Will report back
when I get one to fit.

Ed Anderson

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org