Subject: Art Luther GM Turbo400 based psru
From: Paul
Date: 11/10/2000, 8:03 PM


     > >You are absolutely correct when you state "It looks to me like a helical
     > >gear is going to create thrust no matter what it's geared to and probably
     > >encounter the same bearing problems regardless of the application?"
     > >
     > >The answer is in the Ford C6 auto transmissions in the form
     > >of thrust bearings designed to take these gear thrust loads. Unfortunately
     > >Lou Ross overlooked these thrust loads when he adapted the Ford C6 planetary
     > >gear set. I am sure Ford felt the troubles with helical gears were worth it
     > >for the other advantages namely, quieter and stronger.
     > >
     > >A straight cut planetary gear set would be better for our application
     > >but right at the moment we have not found a low cost suitable set.
     > >
     > >Paul Lamar

     > >Hello all ! Hey if your faces were on some of those pictures I might be able
     > >to make you out at a fly in.  I have a 1994 20 b that I want to put in and rv
     > >8 fyi--- (need rv-8)  any way chevy turbo 400 that came in motorhomes had
     > >straight cut gears from the factory.  anybody working on one of these??/
     > >also you can "t miss me at sun-n-for 2001 I'll be the absolutely cutest guy
     > >there!!

     > Paul Roy  Bristol Ct.


Art Luther wrote:

     I use the turbo 400 straight cut gears in my redrives.
      Art

What does it weigh Art? Got any pictures of the parts or a drawing
you can share?  I have some scanned in drawings from overhaul
books but I was wonder just what you cut away to use for the ring gear and
planet carrier. 

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

turbo400-gears-bakbul.gif