That looks like a DynaCam engine. Hell of an engine from the specs
I've
read. Does anyone on the list run one of these? Are they as powerful
as
they
say? And most importantly, do they last? I love the revolver style
cylinder
block. Not too thrilled about the price though.
Al Gietzen wrote:
When building an airplane was still just a gleam in my eye, I was already
interested in the DynaCam engine to put in it. Very smooth running,
reasonably light weight, high torque, low RPM. Almost too low; max torque
at 1200-1400 rpm; 200 hp at 1800. You need a prop like used on a turbine.
12 power strokes per revolution (6 double-acting pistons, 4-cycle, double
sinusoidal cam drive).
The engine was orginally designed by the Father of the current
brother/sister team running the company. It was certified for use in a
helicopter, but I can't remember by whom; about 30 years ago. The more
recent development included some material changes to make it lighter, and
improve the life of the piston roller to cam that Bill mentioned.
Disadvantages that made me change my mind about using it in my Velocity
were:
High price ($25,000)
CG pretty far from the firewall (not good in a canard pusher)
Very complex exhaust plumbing (12 combustion chambers)
Low rpm needs large diameter 3-4 blade prop
Lastly; after visiting their plant a couple of years ago; I had some doubt
about whether they were going to be around 5-years from now. Hopefully I'm
wrong about that.
They (not Piper) put one in a Piper about 10 years ago. The installation
was not well engineered, they had cooling system problems, some problems
getting the right prop; and didn't get many hours on it (I think they were
running out of money).
There; I've told you more than I know.
Al
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org