Subject: turbo charger exhaust bolts and nuts?
From: Paul
Date: 11/10/2000, 4:40 PM


Has anyone noticed that the studs and nuts on the turbo engines are not
regular steel? They are non-magnetic (ss nuts and studs wouldn't be machined
for this would it? Not strong enough-I think). Are these studs and nuts
inconel? Maybe this is why the price of the turbo studs and nuts are so high
from Mazda?  (I'm talking about the 3rd gen 93+ 13Brew tt and 20B I have
here).

Marc Wiese 20B .....

Bill Freeman wrote:

Depending on the type of stainless steel, it could be either magnetic
or non-magnetic.  The 300 series are non-magnetic, but others are
magnetic.  Even a fairly "weak" stainless steel like 304 is good for
at least 30,000 psi even in the annealed form.   Also, you will
NEVER see a broken nut, the stud or bolt will always break first
with any normal nut and bolt.  Stainless retains more strength at
high temps than carbon steel and does not oxidize as rapidly
(rust), but Inconel is better at very high temps.

Bill
Long EZ builder & pilot
mechanical engineer


The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org