> > >You are absolutely correct when you state "It looks to me like a helical
> > >gear is going to create thrust no matter what it's geared to and probably
> > >encounter the same bearing problems regardless of the application?"
> > >
> > >The answer is in the Ford C6 auto transmissions in the form
> > >of thrust bearings designed to take these gear thrust loads. Unfortunately
> > >Lou Ross overlooked these thrust loads when he adapted the Ford C6 planetary
> > >gear set. I am sure Ford felt the troubles with helical gears were worth it
> > >for the other advantages namely, quieter and stronger.
> > >
> > >A straight cut planetary gear set would be better for our application
> > >but right at the moment we have not found a low cost suitable set.
> > >
> > >Paul Lamar
>
> > >Hello all ! Hey if your faces were on some of those pictures I might be able
> > >to make you out at a fly in. I have a 1994 20 b that I want to put in and rv
> > >8 fyi--- (need rv-8) any way chevy turbo 400 that came in motorhomes had
> > >straight cut gears from the factory. anybody working on one of these??/
> > >also you can "t miss me at sun-n-for 2001 I'll be the absolutely cutest guy
> > >there!!
>
> > Paul Roy Bristol Ct.
>
Art Luther wrote:
> I use the turbo 400 straight cut gears in my redrives.
> Art
What does it weigh Art? Got any pictures of the parts or a drawing
you can share? I have some scanned in drawings from overhaul
books but I was wonder just what you cut away to use for the ring gear and
planet carrier.
Paul Lamar
as soon as I can get time I will send some pictures,
Art
Art Luther wrote:
Thanks Art. BTW I am thinking of going to Fl on the 10th of Dec.
Will you be around? Shop pictures and an article for the News Letter would be nice.
Also some pictures and more info on that airplane at Merritt Island.
I could visit over there as well.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org