Subject: injector spray deflectors, are they really needed
From: Paul
Date: 11/13/2000, 12:59 PM


marc wrote:

Chuck,
I've wondered about this myself. They DO appear to serve as mounting
bushings for the fuel injectors themselves (looks like the injectors
would
not function otherwise unless you made new sockets without deflectors,
or
cut the deflectors off the bottom of the things). Do you know if the air
bleed that side feeds the sockets is operational only at idle or does it
also function at high rpm?
I will pose this question to the rotary airplane engine list, where
there
are many people building 6000 rpm continuous engines apace! Maybe they
know.
Marc

This question is for those who are serious engine builders or
racers. Do the four injector deflectors really do any good
as far as increasing dispersion of the fuel spray for non idle
conditions, or are they there only to improve idle combustion?

It seems that they would interfere with high boost air flow and thus
reduce power somewhat.

Chuck Westbrook - 92R1
Houston RX7 Club
http://www.houston-rx7.net/chuckwestbrook/


Tracy Crook wrote:

I used the deflectors and the air injection passages  (vented to atmosphere)
on the primary injectors (only ones active during idle/low throttle)  but
not on the secondaries.

Tracy Crook
rws@altavista.net
www.rotaryaviation.com


 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org