I really hate to see this happen. Andy has 400 hours on his plugs up 13B powered
Christavia and the engine seized due to lack of oil pressure. According to the Salt
Lake EAA chapter newsletter he has apparently given up on the 13B engine
and bought a Franklin. He is selling his Ross and Warp drive prop.
Andy Venable <avenable@uswest.net>
Supposedly there was nothing wrong with the pump or oil system however
Andy did not disassemble the engine himself so this is third hand hearsay.
My latest guess on the cause in the absence of any further actual evidence
is the slightly worn pump merely lost prime as the hot oil drained out of
it when he shut it down for lunch after a cross country flight. Mounting the engine
plugs up moves the pump up and away from the oil supply. All pumps have trouble
sucking from a height. Not a good thing for an oil pump. This type of failure is
unheard of with the rotary engine when mounted upright. The normal pump
mounting is only a few inches at the most from the normal oil level.
This is why the tried and true old Chevy V8 had the pump in the bottom of
the pan submerged in the oil supply. In a case like that priming the pump
is never a problem.
What ever else you do folks if you can't fit the engine in there right side
up please don't put in a rotary.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org