Subject: Sven's project weight and size.
From: Paul
Date: 11/15/2000, 6:30 AM

Peter Cowan/Lexi Cameron wrote:


  This info came from Sven last year.

General specification is as follows:

The aircraft is an Experimental, 4- place, high wing  taildragger using full span flaps with spoilers for roll control, wing span is 46 ft, with an area of 190 ft2,  "Slab" type elevator, A/C estimated empty weight (on wheels) is 1550 lbs, approved gross weight  is 3800 lbs.Total fuel capacity is 60 US.Gal, located in tip tanks.
A/C is presently installed on  EDO 2870's, when test flying is done and restrictions flown off  we will custom build a set of  3200's.
This is my 9th one of a kind  custom built airplane, all of them  are large  4- place bushplanes. And this is the  first one using  an "Automotive" power plant, I am working on a comprehensive manual for installation of  Rotary engine in aircrafts, with detailed descriptions of cooling requirements as well as parts, sizing, weights, equipments etc.

I am a retired  P.Eng (Mech) since 1993, and have been involved with aviation since 1963.

If I can be of any further assistance please give me a call.

Regards,
Sven Axel Talo
(204) 778-6422
P.O.Box 1015, Thompson,MB,
Canada ,R8N 1N7

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org