marc wiese wrote:
I have finally received my parts to connect the six Chev coils in the
20B. The (steel) brackets need modification for 6 coil arrangement, but
the coils fit in them nicely (and magnetically!). The brackets are from
a V8 and are pn 12562864 and cost $9.00 each. You need 2 (4 coils per
bracket). The harness to connect to the coils (the 4 pin plug on each
coil) is PN 12562863 and does 4 coils per harness, at $77.00 each. It
comes with another connector to continue the harness to the "engine"
loom (a 7 pin connector), which I suppose I will cut off and modify
unless the corresponding connector is available from Chev to connect to
the EC2 (Got to check the EC2 diagram first). The harness is nicely
wrapped in heat resistant silver foil tape.
Marc Wiese
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org