Subject: Possible 20B turbo exhaust (group) buy?
From: Paul
Date: 11/19/2000, 5:15 PM

marc wise wrote:

I have been researching the fabrication of a ss or inconel turbo exhaust
similiar to the HKS one in the attached picture (would add two more
pipes-1 for turbo, 1 for wastegate) for a 20B. I need suggestions as to
the inconel/ss gauge that should be used and the flange material. I saw
the rb(?) one with the expansion bellows and wonder how it worked out.
The ss turbo manifold in this picture has a 4 bolt external wastegate
and is for a 13Brewtt converted to single turbo type T04. It utilizes a
motor flange that is .580" thick, a divided tang turbo flange that is
.453" and a wastegate flange that is .335". The turbo pipes are oval, at
the engine 53.1mm wide by 47.6mm high. The wastegate pipe id is just
over 1.5".
How do you think this layout would accommodate expansion and contraction
and how about supports for vibration? Any suggestions appreciated.
Marc Wiese, 20B

That looks like a real work of art. Long term durability? I can not say.
High temp exhaust manifolds must be a black art. What are they asking for
this Marc?

Paul Lamar

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

Marc-Wiese-HKS-exhaust-man3.jpg