Yes, I still have the radiator. The dimensions are 2 1/2" thick, by 27 1/2"
by 18 7/8". It is the 7000 seiries radiator from C&R racing, you can the
description at:
C&R racing.com . I had the rad built with  Male AN 16 inlet/outlets on the
right side of the rad, facing to the right of the viewer( as seen on the web
site), with a  female 1/4 npt air bleed outlet on the upper left corner,
facing up as seen on the web site. I had the radiator cap omitted because the
intent was to mount the radiator low and have a remote filler on a surge
tank. The radiator is light, about 10#s. I've pulled it out of the box to
look at it. That's it. I just changed my mind since I've been exposed to lots
of cheap a/c evaporators and the fact that we're getting a TIG welder at
work. If  you think that this might be what you're looking for let me know.
Thanks.
Brian Trubee
Redmond, Wa
RV-4  '93 13brew

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org