Subject: New tang muffler design.
From: Paul
Date: 11/23/2000, 9:01 AM

Bulent Aliev wrote:

on 11/23/00 8:12 AM, Paul at rotaryeng@earthlink.net wrote:


Paul,
I agree with you that the tangential muffler could be very efficient, however
based on input from an engineer friend, and Finn's experience, and Tracy's
with the 1000 hour life with an 0.035 stainless muffler, I have come to the
following position.

1. A tangential muffler with short pipes close coupled to the engine is
likely to fail due to differential thermal expansion causing the welded joint
at the tangential pipe to the muffler to be fatigued.  Finn had a failure
like this.  My engineer friend had multiple failures like this when working
on a close-coupled exhaust thermal reactor at Ford.

2. The same muffler mounted a couple of feet away has lasted a long time
(Tracy). IMHO, this is because the longer exhaust header pipes allow more
movement as the muffler heats up, and reduces the stress on the pipe-muffler
joint.

3. Problem #1 can be avoided by the use of bellows for expansion relief
(expensive) or by approach #2.

4. Chuck Dunlap's muffler also avoids this problem, and I believe that you
commented that it was very quiet.

My current choice, a tangential muffler located like Tracy's or Chuck's.

Bill Schertz

Bill, here is my suggestion for the slip joint if you are worried about
differential thermal expansion causing the joint between the two exhaust pipes
and muffler to crack. I incorporated Jeff's suggestion on the down pipe
position to eliminate the possibility of a vortex choking the outlet.
A side cowl exit is shown. I will also redo the drawing of the tuned
version of this muffler.

Paul Lamar

Question: The slip joint, is it welded? if not, how does it seal?

Not welded. Just a close fit. Common on aircraft exhaust systems. 
Here is a picture of Patrick Swaseys Continental water cooled engine
showing the slip joint in the exhaust manifold.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

Continental-Voyager-top2.jpg