Yvon Cournoyer wrote:
Is it not necessary to wrap each pipe twice around the muffler to make up
the 32+ inch tuned length of exhaust?
Yvon Cournoyer
A bit more than once. Assuming a 4 inch radius 8 inch diameter times
pi that is about 25 inches in length. Give it another five
inches of straight section from the exhaust port to the place where
it starts to wrap and you have 30 inches.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org