Subject: Building your own water pump
From: Paul
Date: 11/24/2000, 7:42 AM

paul roy wrote:

How will the mopar water pump fit the rotary? My 94 20b has no water pump or housing 
and I'm finally getting parts for it.  Thanks

You could use the stock 13B water pump or you could design and build a high flow water 
pump housing for the Mopar cartridge. Something that looks like this. This could 
be hogged out of a solid block of aluminum on a mill. Inlet and outlet
tubes could then be TIG welded in. You would then mount the pump the same way 
you would mount an alternator.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

newpump4.gif