Subject: New tang muffler design.
From: Paul
Date: 11/25/2000, 12:53 PM


Bill, here is my suggestion for the slip joint if you are worried about
 differential thermal expansion causing the joint between the two exhaust
pipes
 and muffler to crack. I incorporated Jeff's suggestion on the down pipe
 position to eliminate the possibility of a vortex choking the outlet.
 A side cowl exit is shown. I will also redo the drawing of the tuned
 version of this muffler.

 Paul Lamar


Much better I think, one added change would be to bring the 3" down pipe off
the muffler tangentially, so the whirling exhaust doesn't have to do a 90
degree turn, can just slip right out.

Bill

Yes I thought a bit about that. Probably more power and perhaps more
noise. Don't know. We need to test it both ways.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org