Paul wrote:
I foresee another problem with this mount Kelly.
The forward rubber bushings take most of the load
amounting to about 900 pounds down force per side in a six G
pull-up.
The inner parts of the upper joints are in tension
and the inner parts of the lower joints are in compression.
It is possible for this to work but it is not simple
to analyze for stress and deflection. Paul Lamar
Blake Mantel wrote:
It looks like an moderately annoying static engineering problem... ;(
Blehhh, did that last semester. But if you already made it in metal (as it appears)
provide a bit more information on the tube lengths and angles and I could look if you
are worried. But it looks like Pauls Rx for your Dx is spot on.
Later,
Blake (I cant wait to graduate!)
Cozy MkIV plans
--
CUM CATAPULTAE PROSCRIPTAE ERUNT TUM SOLI PROSCRIPTI CATAPULTAS HABEBUNT.
(When catapults are outlawed, only outlaws will have catapults....)
Triumph Tiger Motorcycle page at: http://pages.cthome.net/bmantel/
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org