Subject: Mild steel exhaust pipes.
From: Paul
Date: 12/3/2000, 7:21 AM


Here is what Tracy's kludged up, temporary, mild steel muffler pipes looked
like
after only a few hours of flying on his way out to Copper State.
Tracy says a thin part of the surface would flake off after each
thermal cycle. Stainless steel if not Inconel is essential for these parts.

Paul Lamar

Chuck Dunlap wrote:

Y pipes are .100 wall mild steel from Racing Beat. They were flaking a lot at
first but seem to have slowed down a lot now. I have 70 hours on it. I
wonder if the chemistry of the metal is changing. One of my welds cracked at
60 hours and I had to remove and re-weld it.I estimate another 70 hours and
they will be finished and ready for plan B!

Chuck Dunlap 

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org