Here is a picture of John Moran's six pinion planet carrier
taken at Tracy's place on Monday.
This should up the HP capabilities of the the Ford C6 based
psru's by 50%. Roughly 300 HP I would guess. It uses the stock
Ford pinion gears, needle bearings, thrust washers and shafts.
IMHO you will need this if you are installing a 20B three rotor.
This one is designed to be installed in Tracy's redrive but it
would also work in Ross psru's with minor modifications.
In the case of Tracy's redrive another part will also need changing if you plan
on retrofitting this to an existing redrive.
That was done to lower the manufacturing cost of a new six pinion
redrive. Tracy tells me he already has a bunch of orders for
six pinion redrives.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org