> > >I have done some thinking about the subject and decided that
tuning the intake
> >is equally benificial for a turbo. After all, manifold
pressure is manifold
> >pressure. The manifold dosent know if its pressure is comming
>from a turbo, or
> >the weight of a column of air. If tuning 20" Hg Manifold
pressure will give an
> >improvement, so will tuning 40" Hg. The charge is still
accelerating back and
> >fourth in the manifold. It is possible (though unlikely) that
increased boost
> >may change the length of the tune although to a minor amount
compared to RPM.
>
> >My guess is that the speed the "wave" travels within the tube is somehow
> >porportional to the speed of sound in that air (although
slightly slower). The
> >speed of sound in air is not dependant on pressure (as commonly
thought) but is
> >dependant only on temperature. Again, this factor would be insignificant
> >compared to the role played by engine RPM in determining the
tuned length.
>
> >Dave Leonard
> > Dave is exactly correct. We have verified this in the
development testing for
> > our forthcoming 240hp supercharged model 240si.
> >
> > Jon Lauter
> > Rotary Power Marine Corporation
> > www.rotarymarine.com
Hans Conser wrote:
Corky Bell says to tune both intake and exhaust.
Hans Conser
Alfonso Lebron-Berges wrote:
Density of the medium through which sound propagates makes a great
influence on the speed of the sound wave (It goes faster in water
than air and faster in a solid than water) and if I am not wrong the
density of the charge coming from a turbo is significantly more than
that of the charge in a normally aspirated engine. To this, of
course, increased temp. has to be factored in too.
Corrections are well received.
Alfonso Lebron-Berges
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org