Subject: Turbo engines and pipe lengths
From: Paul
Date: 12/5/2000, 8:15 AM


I have done some thinking about the subject and decided that tuning the intake
is equally benificial for a turbo.  After all, manifold pressure is manifold
pressure.  The manifold dosent know if its pressure is comming from a turbo, or
the weight of a column of air.  If tuning 20" Hg Manifold pressure will give an
improvement, so will tuning 40" Hg.  The charge is still accelerating back and
fourth in the manifold.  It is possible (though unlikely) that increased boost
may change the length of the tune although to a minor amount compared to RPM.

My guess is that the speed the "wave" travels within the tube is somehow
porportional to the speed of sound in that air (although slightly slower).  The
speed of sound in air is not dependant on pressure (as commonly thought) but is
dependant only on temperature.  Again, this factor would be insignificant
compared to the role played by engine RPM in determining the tuned length.

Dave Leonard

Dave is exactly correct. We have verified this in the development testing for
our forthcoming 240hp supercharged model 240si.

Jon Lauter
Rotary Power Marine Corporation
www.rotarymarine.com

Hans Conser wrote:

Corky Bell says to tune both intake and exhaust.

Hans Conser



The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org