Subject: third gen recall for fuel and hoses
From: Paul
Date: 12/5/2000, 3:59 PM

marc wiese wrote:

Perhaps I should speak up here, having to support two 94 rx7s. The third
gen had 3 NHSTA recalls. The most involved (2nd) was for the stated
reason "engine fires possible" and included first and foremost the
replacement of certain hoses (coolant and fuel) with those made of a
better HEAT resistant material. In addition the coolant sys pressure was
reduced to .9 bar (13.5 psi) with a new cap, and the 2 electric radiator fans
(there is no water pump/pulley fan) were modified to add some
intermediate speeds with related control relays and water temp sensor.
I can confirm that the underhood temps on the 93+ rx7s is high. Add a
fouled cat or two and you could bake a cake in there. Lots of [3]s take
out the first cat and replace with a ss downpipe, and do a mod to run
the fans for 10 mins after shutdown to help underhood temps.
Marc Wiese

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org