Joel Ventura wrote:
On one of the mail lists I subscribe to (I think it was
canard-aviatiors) there have
been warnings to not use powder coating on engine mounts. The coating
adheres poorly to
the substrate, and cracks in the tubing with not show up in the
coating
surface. In
fact some coating companies advertise powder coating as a way to cover
up cracks. White
paint is a much safer alternative.--Joel
Mike Wills wrote:
Ive also been told that powder coat is not a good moisture barrier. Vans
is currnetly supplying some of the 4130 weldments in the RV kits already
powdercoated. Ive heard of several cases where these parts were rusting
under the powdercoat right out of the shipping box. Powdercoat is a good
durable ornamental covering but I agree with Joel, paint the motor mount.
Mike Wills
Andrew Larkin wrote:
Several of my welded parts from Stoddard Hamilton have rusted under the
powder coating. I'd strip it off and repaint with epoxy primer if I didn't
hate all those damn chemicals so much.
Andrew Larkin
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org