There's a funky thermostat setup in that water pump- you can't just remove it
or you will recirculate a lot of coolant back to the engine and bypass the
rad. You have to close off the bypass passage if you remove the thermostat. I
took off the top 3 inches or so and will weld on a plate to the top of the
pump housing. The outlet of the pump will be an AN 16 fitting welded onto the
plate. You also have two probes in that portion of the housing- one is the
coolant temp, and one is the coolant low level sensor.
Brian Trubee.
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org