Tracy Crook wrote:
John, Thanks for the "real world" info. This is hard to get sometimes.
Could you verify that 360 lbs was without cooling system components. The
following is a list of my calculated 20B installation weight based
(mostly)on actual measurements of the individual components. My expected
power is 250 - 270 HP.
Bare block 20B = 257 lbs
RWS redrive = 42
Griffin radiator = 10
Toyota evap. Core = 6 (oil cooler)
Intake system = 12
Exhaust system = 13
Alternator = 9
Hoses, clamps etc. = 6
Coils = 6
Coolant = 16
Starter = 7.5
___________________
384.5 lb
Tracy Crook
rws@altavista.net
www.rotaryaviation.com
John Petrie wrote:
This 360 lbs excluded the exhausts, oil, radiator, coolant and hoses, but included
the following:
Ross drive, starter, alternator, EG33, throttle body and Carbon intake manifold,
oil cooler for the redrive, Carbon air box and filter.
John
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org