"james r. west" wrote:

how much fuel should the injectors feed in start mode and should the

secondarys feed

fuel  in the start mode?

I assume this is a question for Tracy Crook. Tracy?

Paul Lamar

Tracy Crook wrote:

The EC2 doubles the fuel delivery when the cold start switch is on.  This
has been adequate in all conditions I've been able to test in.  Of course it
should be remembered that I live in Florida.

All injectors are active when the manifold pressure is above the stagging
threshold (which is adjustable).  Normally the threshold is set to about 15"
Hg.  MAP.  Since manifold pressure is close to atmospheric while cranking,
the secondaries would be on.

Tracy Crook
rws@altavista.net
www.rotaryaviation.com

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org