Charlie Kuss wrote:

Finn Lassen wrote:

No, no evidence it's the PSRU. I've had a very small leak for as long as the plane
has been flying, around the oil filter mount pad. The leak has now grown so big
that I need to do something about it. Actually the photo was after a 10 minute (or
less) flight after I replaced the two o-rings. I either need to go to thicker
o-rings or it's the oil sensor or oil pressure switch that's leaking.

Finn,
 I managed to meet and speak with you very briefly at the Treasure Coast RV fly in
(Weekend at Bernie's) several weeks ago. A bit later I looked at your ship. I noticed
the oil covering the outside of the engine. I also noted that I couldn't determine what
provisions you had made for a crankcase breather system. I noted that several areas and
possible vent areas were capped off. Did I miss you vent system? If not, this is the
most likely cause of your oil leakage.
Charlie Kuss
RV-8A
Boca Raton, Fl.

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org