Subject: Exhaust Flex Tubes
From: Paul
Date: 12/27/2000, 10:58 AM


     http://www.mountainmuffler.com/flextubes.htm

     Has anbody tried these yet?

     Paul Lamar

tommayer wrote:

Paul,
 I used one of these on my turbo Lyc installation.  It has worked very well for more than 700 hours now.  No problem with the flex section, no cracking problems anywhere in the exhaust.  Exhaust system is a stock early Seneca, I assume 321 stainles and .035.  Wastgate, which has given lots of problems, is a simple Rayjay butterfly.  Turbo is bolted to the engine mounts, with one of these things between it and the wastegate. I thought this would handle vibration and flexing better than  a multitude of slip joints and ball joints, and it has done very well.  I assume if it will handle the vibration from a four cylinder Lyc it ought to be very hapy on a rotary.  Tom Mayer

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org