Paul,
Would you happen to have industry standard part number
handy for teflon/silicon O-ring that fit outer position
on 13B housings? Along the same line of thought,has
anyone in the group used teflon/silicon or teflon/viton
for their oil control O-rings? There was some concern
about oil degrading the silicon if used for oil control
as I recall.
Kelly Troyer
--
Dyke Delta/13B Rotary Power
Let me search for that size on the CD Kelly. I did that calculation at least once.
Tom Kimsey in Atlanta has a complete set and he was supposed to call
me and discuss what he found out about fit on the complete set I sent him.
Perhaps he is still on vacation.
The trouble with Viton as opposed to silicone is it is only good to 400
degrees F and not 500 F. As you mentioned silicone is degraded by hydrocarbons.
The question is, how porous is the teflon coating? I have heard rumors
that it is porous. I need to call Creavy and verify this. Right now I am leaning
in favor of the silicone core material. Stainless steel springs can also
be used as cores for the teflon tubing.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org