Subject: Universal motor mount plate for Tracy's redrive?
From: Paul
Date: 12/27/2000, 5:43 PM

Tracy Crook wrote:

Paul,  forgot to mention that the center hole should be 1.010" for clearance
around the input shaft (which is 1.000").

Tracy

OK! Good! Thanks for your help on this Tracy.
A hydra cut version with cut outs would look real trick :-)

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org