Thanks Paul and Tracy for the info. on the throttle body.  I am glad to
be able to use this, it will be a much lighter unit.
Rino

John Slade wrote:

What info on the throttle body? Did I miss something?

To paraphrase; Tracy said a smaller one than the area of the pipes is OK and I said
you need to measure the pressure drop across the throttle body with a water
manometer.

What I did not say was if there is a pressure drop across the throttle
body it is too small and you are losing HP. To my way of thinking it is better 
to be too large than too small.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org