I never thought my hot plate would heat the oil well over 500
degrees but it sure did. So much smoke was pouring out I had hangar
neighbors coming over and complaining about the smell.
In any event not only did I destroy the o-ring but the Mobil
1oil turned to asphalt. It has a very strange smell when
you get it this hot.
I got my temp controlled industrial oven back from Tracy Saylor
so the next test will be temp controlled at a more realistic
500 degrees F.
The first picture is what was left of the O ring.
The second was the oil ring in the stainless pan with boiling
Mobil 1 near the start of the cook off.
The last picture is the Mobil 1 turned to asphalt :-).
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org