Perry Casson wrote:
Hi Paul,
You can add my name (and I expect Gary Palmers as well) to the list of those
that are interested in getting plates for our redrives.
I got an email from Tracy saying he will reduce the price of the redrive by
$100.00 if you do not require his standard plate.
I've attached 3 dxf files that may be of interest:
fwf-3d.dxf - semi 3d wireframe of a glastar fwf with a plate mount (work in
progress).
13blrb.dxf - Mike Wills' style left rear bracket we might as well get cut at
the same time as the plate as it's made from the same stuff.
13b_rrb.dxf - Mike Wills' style right rear bracket made from .5" X 5" angle
stock.
Both of the rear brackets are designed to use Barry Mounts.
I've been talking to a local hydrocutting shop up here in Canada and would
be glad to get a quote once we have a head count of how many we need to
make.
Perry Casson
Thanks Perry. I have zipped your dxf files to make them small enough to upload.
Here they are.
I have not had much luck with dxf files lately so perhaps someone can unzip them
and convert them to gif's or jpg's and upload them again.
BTW it is best to use only one mount in the rear so all torque is taken by the
front mounts. The rear mount (tractor) mostly takes a bit of prop thrust and a
small portion of the download during a 6 G pull out or hard landing.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org