I forgot Dave... do you have an RV4 or an RV6
Its an RV-6. I made a scale mockup today and the overlap is only about 1/2
the area of the openings. I had also forgotten about the 10" space there -
hard for me to think 3D :-) so you are right that I don't think that will be
a problem.
Dave Leonard
Here is a picture of the cut plate with the mounting holes installed on the
the engine and redrive. No starter yet. Lots of clearance for turbo
or muffler. The other side of the cowl is empty. Note I will be able
to raise my radiator about two inches up under the new redrive
plate for a more favorable radiator mounting angle. The mock up rad shown
is 19 inches wide by 22 inches long. Fits easily inside the
unmodified cowl. This is the main reason I came up with this redrive plate idea
in the first place.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org