Subject: Universal motor mount plate for Tracy's redrive?
From: Paul
Date: 1/1/2001, 11:30 AM

Perry Casson wrote:

Hi All,

Sorry for the problems with the dxf's.  I guess Intellicad's dxf export is a
bit buggy.

Attached are screen shot of the 3 drawings I tried to send out.

The two rear attach bracket drawings are pretty much copies of Mike Wills'
rear mounts (left bracket bolts to the water pump, right to the AC
compressor bolts).  I'm suggesting we get these hydrocut at the same time as
the front plate.

fwf-3d.jpg is a 3D Glastar FWF using a plate mount.

If anyone wants the original .dwg files send me an email.

Perry


I just think DXF as a file standard has failed. Apparently every software company
has their own version. Its a real shame as there is a real need for a CAD
file interchange standard.

Lets do a little survey. Perhaps we can all agree on one CAD program.
Chime in on the CAD program, operating system  and version number you are using.

Perry Casson is using Intellicad version ?? operating system ??

I am using DOS ACAD 11 but I have Windows 95/98/2000 (at least my wife does) 
so I could get what the majority have as long as it will run on Windows 95/98/2000.
Preferably we would like a CAD program that output bit maps such
as gif's, jpg's or bmp's.

BTW the front motor mount that bolts to the oil pan flange should be universal
as I think all year engines are pretty much the same bolt pattern in that regard. 
In any event this is real easy to saw out of 1/2 plate and match drill it 
to the oil pan bolt pattern that you have around the front cover. 

The same universal fit idea goes for the new redrive plate itself. 
For example: Early 13B's had the motor mount on the front
cover. Second gen 13B's had the motor mounts on the center housing.
Third gen 13B's had the motor mounts on the rear housing. All 13B and 20B's
(I think) have the same bell housing bolt pattern so the Universal Motor Mount Plate
should fit them all.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org