Subject: Universal motor mount plate for Tracy's redrive?
From: Paul
Date: 1/1/2001, 12:01 PM

BTW speaking of off set rear motor mounts. If your prop turns counter clockwise
looking at it from the pilots view (and I think most Ross and Tracy's 
redrives turn the prop counter clockwise)
you should put the single rear mount off set to the right looking
at it from the pilots view. The reason this is so is the right
side mounts have higher loads on them compared the left side mounts.

This is because the torque reaction from the prop is added to half
the weight of the engine on one front mount and subtracted from the 
half the engine weight on the other front mount.  Putting the rear mount off set 
to the right will relieve this load somewhat on the right side front mount.

This is a factor frequently ignored in aircraft motor mounts so it
is no big deal. The bed mount in my Cessna 182 totally ignores this effect.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org