Subject: Universal motor mount plate for Tracy's redrive?
From: Paul
Date: 1/2/2001, 4:42 PM


Does anyone have any idea what the center to center distance should be
for a
Velocity??????

Don

If you use the stock cowl 29 inches center to center should fit as that was
determined by the stock cowl for a Kis Cruiser with a Lyc O-360 installed.
Since the Velocity cowl will also accept a Lyc O-360 the width should be
roughly the same.

The 29" will fit, but only because of the "cheeks" in the standard cowl for
the Lyc cylinders.  If you'd like to take advantage of the Rotary
configuration and streamline your cowl; that dimension is too large by about
6".

Unless you have a stock turbo. One size fits all. Cut to fit. PL

As I recall Tracy's redrive plate should be about 24 inches from the
firewall.


Al Gietzen wrote:

For a 20B, the redrive plate will be about 28" from the firewall.

Al

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org