Subject: Tailless blended wing body aicraft.
From: Paul
Date: 1/3/2001, 5:26 PM

Stone Tool wrote:

Paul:
    I was recently looking at the photo of the surviving BWB swept flying
wing that was posted to the list......   It is almost impossible to tell
looking at a top view as in the photo, but it appears that there is very
little washout if any...........   I would strongly suspect that the problem
with spinning in was the result of tip stall.     I fly trikes which use
swept flying wings, and they achieve stability through a lot of washout.
Stability in any flying wing is a serious tight rope act.    It must be
designed in such a way that upon pitching up there is a pitch down force and
vice versa.   The short couple of the craft makes this difficult.   Flying
wings generally use washout and reflex to accomplish this.   Without
understanding the principles of stability in flying wings it is difficult to
achieve it........ a crap shoot.

                       H.W.

Here is a side view.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

Dan-Gray-BWB2.jpg