Subject: Universal motor mount plate for Tracy's redrive/rear mount.
From: Paul
Date: 1/3/2001, 1:25 AM


Martin Orro wrote:

Are you going to groove the plate, use shims or flatten the flange on
the oil pan?

Paul wrote:

Shims.



"Perry J. Mick" wrote:

Interesting.  I ground off the 1/8 inch flange on the front of the oil pan
when I built my mount.  I ground it off the right side too, where I have
that plate that bolts to the bottom using the three large bolts and also
picks up a few of the oil pan bolts.
--
Perry J. Mick
Mick Duckt N7XR
http://www.ductedfan.com

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org