Subject: width options of the UMM plate
From: Paul
Date: 1/4/2001, 11:53 PM

Jeff Spitzer wrote:


Jeff Spitzer

I am a bit surprised Jeff. The torque pulse is constant and the mount
"spring"
rates are the same the angle of deflection will be half with the wide
mounts
as the torque pulse load on the wide mounts is half. Don't forget the
deflection due to static weight. Also these rubber mounts are not linear
and have a rising rate. Half the torque pulse load means they are more
nearly
operating in the linear region.


Linear has nothing to do with it.  If you allow the engine to rotate *more*
it gives a smoother ride.  The torque pulse is absorbed and returned in the
inertia of the block thus not transmitted to the airframe.

Jeff Spitzer

So I will use bushing with half the rate.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org