Subject: A new interesting 100 HP VW based engine.
From: Paul
Date: 1/5/2001, 12:05 AM


I get readers from time to time looking for a light weight low cost 100
HP engin
e.
A 100 HP one rotor Mazda rotary is too heavy.

http://www.pulsaraircraft.com

The weight of the Aeromax engine is listed as 165 pounds. That is highly
unlikely. That sounds like the weight of the core VW engine alone, less
the
gear box. The "Built in elastic harmonic ** balancer **." I think he is
talking
about
is an elastic torsional isolator or torsional damper and not a
"balancer".

Most likely a torsional damper. I guess I need to see this engine to be
sure.

Interesting engine. Not a bad power to weight ratio even including 30
pounds
or so for the gear box. Right down there with the weight of an O-200.
About time somebody put a prop reduction gear box on a VW and ran it
faster
for more power. Overhaul parts should be real cheap indeed. Now if you
can get the exhaust valves to cool should be a pretty good engine.
I wonder if the gear box is available separately?

Paul Lamar


Ken Powell wrote:

I think you can get sodium filled exhaust valves for the VW?  Does anyone
know  for sure?

Ken Powell

Stone Tool wrote:

Sodium filled exhausts are pretty standard on higher horse VW
engines............   It still doesn't address the problem of not enough fin
area to carry the heat away.

I agree. The cylinders should look like these.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

R4360-cylinders.jpg