Jean Fouche wrote:
Hello
I know that some rotary specialists have an offer of stainless steel
o-ring
inserts.
The OE 12A Rx--7 gasket sets does not include inserts in South Africa.
The MAZDA gasket set I bought for my 75 Rx-2 Capella did include them.
Now
I am confused...
Jean Fouche
Leon Promet wrote:
Hi Jean,
##
Any idea who they are and why they do it? I have absolutely no idea why
anyone would want to run stainless steel "O" Ring inserts. I'd be
interested to find out their reasoning.
The only time they would be of any benefit would be if the housings were
warped and you needed to shield the "O" rings from the combustion gasses.
The "O" Ring is there to seal the water, not the combustion gases anyway.
If the housings are warped beyond specs, the gases would just blow by
anyway and, as I said in an earlier post, you eventually end up with a
steam engine!!. Time for some new housings!!.
##
Only the '73~ on RX2, RX3, 4, & 5 (single Dizzy) gasket kits come with
them standard, but you can buy them from Mazda in a packet of 4. .
##
No need to be confused. It is really quite easy and simple. The '79 ~ 85
RX-7 aluminium housings are made of an improved low coeff of expansion
aluminium alloy so Mazda obviously deemed that they were no longer
necessary. But I still use them anyway in all motors up to, but not
including the new style '86 ~ on models. Mazda were obviously still having
troubles, so that's why they finally decided to put the "O" Ring grooves
in the cast iron housings where they should have been in the first place.
Cheers,
Leon Promet
Leon and everbody. Please do me a favor and use the above editing format.
It has been traditional with letters to the editors in mags and newspapers
for the past 50 years.
I have been trying to use it whenever possible for the last 2 1/2 years.
Full question and then full answer. Thanks.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org