Subject: A new interesting 100 HP VW based engine.
From: Paul
Date: 1/7/2001, 4:23 PM


Stone Tool wrote:

Pretty impressive finning on those cylinders.......  The thing is heat
dissipation from the head more than the cylinders.   An air cooled engine
has problems getting enough head fin area due to the chamber with the valves
and rockers...(valve deck)..... one of the reason lots of the radials had
the vave decks way above the rest of the fins and had little bitti
individual rocker boxes.... This requires a long valve stem which passes
through a guide with contact to quite a bit of fin area.     You probably
have some good pictures of this.... I don't.

                             H.W.

Here is another P&W R4360 cyl shot. Interesting thing about these cylinders.
The fins are machined by a bunch of stacked up slitting saws
with spacers and not cast. Real easy to do with today's NC mills.

In those days they needed a cam to guide the slitting saw stack
around the heads and cylinders. The strips shown damp out the
very thin fin vibrations. P&W was in the machine tool manufacturing
business long before they started building aircraft engines.

BTW The P&W R4360 was lower HP per cubic inch engine at 3000 HP than the CW
R3350 turbo compound at 3800 HP. The three turbo compound blow down
turbines added something like 900 HP with out adding to the heat
load or the number of fins per inch on the core engine.

Paul Lamar


vjaqua wrote:

 There is an engine called the JPX that is VW derived that appears to have more
head fins than any of the other aftermarket heads. Before I welded on a VW head I
would check that out. I tried to find a picture of the engine but my filing system
failed me - Vance

Bill mentioned the mag cases. One can buy stronger aluminum cases. Heavier
of course. I looked at a R3350 TC today and some of the fins are cast and
some near the exhaust side are machined using slitting saws.
Some are formed aluminum sheet pressed on to the cylinders.
All bases are covered :-)

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org