This manifold is made by Star. Looks like a 45 mm weber carb
so I think this would make a good start on a tuned intake manifold
for a six port. All one would need is a six or eight inch extension
on this manifold.
The Star engines are 1984-6 vintage 13 B's. They buy the
parts in Japan right down to the cast iron water pumps and build them
up with these manifolds and distributors with coil ignition.
The six port sleeves are removed but no JB Weld is used to smooth
the intake ports. No porting of any kind is allowed.
The web site rating for HP is a bit low. The guys told me
it is more like 180 HP AT 6800 RPM rather than 170 HP
at 6600 RPM. The 2-1/4 inch diameter twenty two inch long exhaust
pipes enter a 2-3/4 diameter collector and thence through a
Borla SS muffler that sooner or later spits out its SS guts :-)
Probably 204 SS.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org