BTW I forgot to mention. If anybody wants to build your own plate
and use my tooling and Tracy's redrive plate for a pattern
let me know. You can borrow mine. The Hydro Cut redrive/mm plate may or may
not materialize and if it does it may be way more than $100 if
made in small quantities. I don't know yet. I need to finalize the
drawing and send it out for bids.
A good set of transfer punches in 1/64th increments up to 1/2 inch
would be essential as I would not want you to use my Tracy plate
directly as a hole drilling jig. Tends to wear out sooner than later.
Also it takes only about two minutes to cut the plate on
a good band saw with the right number of teeth per inch on
the blade and the right blade speed. The hardest part is
boring the pilot hole for the starter and counter-boring
for the oil seal. You could farm those jobs out to a local machine
shop in necessary.
I can help you step by step if necessary.
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org