Gary Wolf wrote:
Hi fellows,
I am responding to the posting about the maximum safe rpm for a VW engine. A few years ago I did three seasons of regional racing in a Canadian spec formula V 1600 race car, all with the same crank and cases. We typically revved to 6300 rpm, lifting the foot only once per 90 mph average lap at Mosport. Each season I tore down and replaced bearings as a matter of course, not because of need. The secret was a good Gene Berg counterweighted crank. There was never any pounding out of the centre main bearing supports in the cases with this setup.
The other day I was at my local Japanese engine importer and saw that he had a 20B and two 13B twin turbos, all with computers. I think I have mentioned him. The company is Japan Auto Parts in Toronto (Trawnna) and the phone number is 416-783-8086. I think his e-mail is bwulfy@netcom.net . The fellow I usually speak to is Bruce Wulfsohn, the owner of the company, but I think Omar is good as well. The other phone guys I don't know.
Gary Wolf
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org