Subject: two piece end housings single rotor
From: Paul
Date: 1/9/2001, 8:38 AM


Paul wrote:

The direct drive low RPM turbo two rotor is also an interesting concept
to me. Hopefully Perry Mick will get around to trying that.

"Perry J. Mick" wrote:


I'm tearing down my turbo motor now, for rebuild.  But it will still be
high rpm (5000).  Found out the turbo will work with my new mount,
that's good news.

Perry J. Mick
Mick Duckt N7XR
http://www.ductedfan.com

I guess we need to define high. 280 HP at 9000 RPM is high.
6000 RPM is medium and 5000 RPM is low :-) Just kidding.
I had something around 3500 to 4000 RPM direct drive pumped
up with the turbo in mind. I should have been more specific.

Will your ducted fan 13B achieve 5000 RPM now Perry?

Good work on the mount Perry.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org