James Russell wrote:
I talked to engineer Ron at Star Mazda today and he confirmed that these
VW radiators were very inefficient. He uses them because he can buy
them for much less than $100. He says they can run one expensive efficient
radiators or two of these. Two of these are cheaper than a Fluiddyne
racing radiator. We do not enjoy that luxury as we are space limited :-)
Yes, and we don't have to worry about the driver "rubbing" a sidepod against a
barrier. : )
Ron's theory on why they don't work well is; the front round tube blocks the
air flow to the rest of the round tubes behind it. With the wide
flat oval tubes
in a conventional radiator that does not happen. I think Tracy has a point
as well and the heat transfer out of the round tubes into the fins is not
as good as it would be with a flat oval tube. The core of the water flowing
through the round tube remains hot. Only the water adjacent to the wall
of the tube loses its heat due to the necessary turbulence.
Paul Lamar
I never tried those "Turbulator" type coolers because of cost. Has anyone? It
seemed like a really good idea, especially for oil...
Regards,
James
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org