Darrel Drumond built the engine and dynoed it at 183 HP at 7100 RPM.
Jim is using a Ross 2.85 : 1 gear box so it ought to climb great.
Dual evaporator cores. One under the engine and one vertical on the
left side from the pilots view. Stock RX7 oil cooler under the
front of the Ross.
Paul Lamar
Paul,
If you can tactfully get him to make a support bracket for the big heavy
oil pressure sender hung off that brass T in the PSRU oil feed line, plus
add a pair of Adel clamps on the PSRU feed line, I'll feel a lot better.
Extremely nice looking installation.
Bill
I'll try.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org