Subject: Aircraft Turbo 20B for sale
From: Paul
Date: 1/13/2001, 6:40 PM


Because of a broken oil cooler incident, my wife has persuaded me that I
need to replace the rotary engine with a conventional aircraft engine in my
Velocity. The broken oil cooler  was to be solved by replacing it with a
heavy duty Mazda oil cooler and relocating it outside the engine
compartment into the wing (as Long EZ and Cozy do).

Therefore, I will be selling my complete turbocharged 20B engine, updated
Ross PSRU, and IVO prop for $15,000 (or best offer). The engine was
completely rebuilt and has less than 30 hours total, mostly ground and taxi
time. It will produce in excess of 300 hp continuously at less than 6000
rpm (2,700 prop rpm). The design of this package was for high altitude
(8-18K') and high speed (>200 kts) cruising. The plane was flown at over
200 mph at 2,500'.

 The package includes radiators (2 custom aluminum), Microtech engine
management system, custom Inconel exhaust manifold, Turbonetics T-S04
Inconel turbocharger, custom aluminum intake manifolds, custom 10 qt
aluminum oil pan, modified (thrust bearing and sun gear oil spray) Ross
2.17 PSRU, custom Velocity (bed type) motor mount,  and IVO Magnum (deep
pitch) in-flight adjustable prop. The engine/psru is 41" long and roughly
36" in diameter, and weighs approx. 430 lbs. dry. I've attached some photos
of the engine. The engine is off the plane in my hangar.

I will warrant that the engine is in good running condition and will
provide reasonable technical assistance to the purchaser. If you are
interested I can be contacted by phone or by email.  Additional engine
pictures can be viewed at the following website-
http://www.atkinsrotary.com/chuck.htm
Chuck Harbert
14802 NE 66th St.
Redmond, WA 98052

206-499-5990 (cell)
425-709-5029 (work)
425-885-3226 (home)


 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

Chuck-Harbert-chuK3ROT.JPG