Harley wrote:

Paul...

Great news Harley Can you get a gif out of it  for us?<<

Yep...attached...

Hope it means more to you than it does to me.  It appears to be the front
view and a top view... it appears to be a 3D drawing.

The text and dimensions can be zoomed in on while in the cad viewer but it
overwrites itself and is pretty much unreadable.  I turned the layers off
one by one hoping that the text would be on several diffeent layers and
could be extracted fom the drawing, but no luck.  It's all in one
layer...and it's not the one named "Text"! <G>

In the gif, the conversion isn't fine enough to make any of the text
legible.

Harley

William Kincheloe wrote:

AutoCAD200 will output to a bmp and other raster files through a print
driver that is included. The advantage over a screen capture is that you are
not at the mercy of your screen resolution. You can specify the resolution.
I know that some earlier version have this ability but I'm not sure how many
versions back it goes.

If anyone is interested I'll post a step-by-step setup of the driver and
print and example.

-Bill

bmp's are good. I can convert those to gif's.


Just felt an explosion or a sonic boom. Was something supposed to re-enter today?

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org